View Single Post

Old 04-07-2011   #12
John Hermanson
Registered User
 
John Hermanson is offline
Join Date: Dec 2008
Posts: 350
Hot shoe screws go on from the inside. The circuit board picture on my site doesn't show the flex circuit inside the top cover. Hot shoe pins are soldered into the flex, and the flex (attached to the inside of the top cover with double sided tape) covers 2 of the screws that hold the hot shoe in. That circuit and "spot-high light-shadow" contact plate must be taken off and flex pealed up from the top cover to get at the screws. Not really a home job, imo. John
  Reply With Quote