ian.scholey
Newbie
HI,
Appreciate some advice to find a tripod head quick release plate (or L bracket) for a Voigt Bessa R2.
It looks like the camera tripod thread is mounted close to the lens mount and the generic plates when screwed on are going foul the lens focus tab as it is rotated.
Are there any plates with the thread hole / slot offset so they don't foul a lens tab ?
Thanks
Appreciate some advice to find a tripod head quick release plate (or L bracket) for a Voigt Bessa R2.
It looks like the camera tripod thread is mounted close to the lens mount and the generic plates when screwed on are going foul the lens focus tab as it is rotated.
Are there any plates with the thread hole / slot offset so they don't foul a lens tab ?
Thanks
john_s
Well-known
Maybe something like this one. I have one (or similar, maybe from Really Right Stuff, I don't remember)
Maybe the ridge that prevents the plate turning could be at the rear not the front.
I'd not recommend the plates without a ridge that have instead some rubber or fibre pad because they will loosen and rotate.
Maybe the ridge that prevents the plate turning could be at the rear not the front.
I'd not recommend the plates without a ridge that have instead some rubber or fibre pad because they will loosen and rotate.
Godfrey
somewhat colored
The RRS B9-E plate has an offset mounting screw and is quite versatile. I've used it a lot.
G
G