ARCHIVIST
Well-known
I have been considering a Voigtlander Bessa L but have come across many that have been described as having sticky rear covering on the back.
Can anyone enlighten me please about this problem and is it inevitable to occur?
Cheers
Peter
Can anyone enlighten me please about this problem and is it inevitable to occur?
Cheers
Peter
santino
FSU gear head
It has to occur.
You can rub off all sticky stuff with alcohol (its a fault of design - the rubber is too soft).
You can rub off all sticky stuff with alcohol (its a fault of design - the rubber is too soft).
ARCHIVIST
Well-known
Thanks Santino.
I think i will give the L a miss.
Peter
I think i will give the L a miss.
Peter
p.giannakis
Pan Giannakis
You can get online pre-injection swabs (£1.30 for 100 swabs). I cleaned my Nikon F90X and F80 with them.
teddy
Jose Morales
I've got a Bessa L. The rubber feels yucky. What are these pre-injection swabs?
Archlich
Well-known
I found alcohol followed up by thick baking soda paste to be highly effective in cleaning up the sticky rubber coating.
ARCHIVIST
Well-known
Pre-injection swabs are the little alcohol soaked wipes they rub on your skin before injections or taking blood samples etc.
It is essentailly isopropyl alcohol. Get them from pharmacies, beauty salons etc. They are cheap as chips.
It is essentailly isopropyl alcohol. Get them from pharmacies, beauty salons etc. They are cheap as chips.
kamil_k
Member
Yes, it is inevitable to occur. The rubber degrades with the time. There are several more and less elegant/permament solutions or workaround for this - I posted my fix some months ago as well. I assume it depends on the age of your camera - in my case isopropyl was only a temporary fix. What it does it removes a thin layer of rubber.
You are anyway lucky - there are two inevitable things which will happen to CV Bessas - the second one is misaligned rangefinder (absent in Bessa L)
You are anyway lucky - there are two inevitable things which will happen to CV Bessas - the second one is misaligned rangefinder (absent in Bessa L)
ARCHIVIST
Well-known
Thank you!
teddy
Jose Morales
Pre-injection swabs are the little alcohol soaked wipes they rub on your skin before injections or taking blood samples etc.
It is essentailly isopropyl alcohol. Get them from pharmacies, beauty salons etc. They are cheap as chips.
Thanks Archivist. Maybe I can just remove the whole rubber thing and make something up out of wood, leather? Ideas, ideas...
Archlich
Well-known
Thanks Archivist. Maybe I can just remove the whole rubber thing and make something up out of wood, leather? Ideas, ideas...
The plastic underneath actually feels very good. There’s a decent texture to it so not slippery at all.
Ko.Fe.
Lenses 35/21 Gears 46/20
Google search brings solution to this problem already covered on RFF.
https://www.rangefinderforum.com/forums/showthread.php?t=149138
https://www.rangefinderforum.com/forums/showthread.php?t=138358
I would go with removal and using half-case:
https://www.ebay.com/itm/Mr-Zhou-Bl...923991?hash=item27c3190f57:g:cmMAAMXQcWVREhZz
Or original if it is still available.
https://shop.cameraquest.com/35mm-bessa-accessories/voigtlander-bessa-deluxe-brown-case/
https://www.rangefinderforum.com/forums/showthread.php?t=149138
https://www.rangefinderforum.com/forums/showthread.php?t=138358
I would go with removal and using half-case:
https://www.ebay.com/itm/Mr-Zhou-Bl...923991?hash=item27c3190f57:g:cmMAAMXQcWVREhZz
Or original if it is still available.
https://shop.cameraquest.com/35mm-bessa-accessories/voigtlander-bessa-deluxe-brown-case/
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.